![](https://www.mitek.com.au/wp-content/uploads/2021/06/Building-products_bg_image.jpg)
CreeperConnector
For fixing jack truss to hip truss
For fixing jack truss to hip truss.
CreeperConnectors are available in two forms, CC200 for 0 to 12.5° pitch chords, which is suitable for both left and right hand configurations, and CC200L and CC200 for 15 to 25° pitch chords, which are left and right hand configurations respectively.
Uses
- CreeperConnectors have been designed to connect jack trusses to hip trusses.
Advantages
- CreeperConnectors are metal plates pre-punched to accommodate nails and bent to suit roof pitches up to 25°.
- CreeperConnectors may also be used to connect half trusses or cut-off trusses to boomerang girder trusses.
![](https://www.mitek.com.au/wp-content/uploads/2021/06/ISO-9001-Statement-1.jpeg?w=695)
![](https://www.mitek.com.au/wp-content/uploads/2021/06/CreeperConnector.jpeg?w=500)
![](https://www.mitek.com.au/wp-content/uploads/2021/06/CreeperConnector-Image-2.jpeg?w=500)
![](https://www.mitek.com.au/wp-content/uploads/2021/05/stone-bg.jpeg)