ExtraHeavy Universal Girder Bracket
The ExtraHeavy HiLoad Girder Bracket will support trusses 35mm to 90mm thick and is also suitable for girder truss bottom chords of 130mm and deeper. The supported truss can be located on either side of the cleat making the location of the bracket much simpler.
The ExtraHeavy HiLoad Girder Bracket is manufacture with a long cleat to prevent the twisting of the bottom chord of the girder truss. The cleat also has a cut away section which avoids the possibility of interference with ceiling linings.
- The 6mm ExtraHeavy Universal Girder Bracket is designed to secure heavily loaded trusses, like truncated girder and secondary girder trusses to primary girder trusses.
- ExtraHeavy HiLoad Girder Brackets are top of the range Girder Brackets utilizing M16 bolts and a large angle section for increased bearing and a long cleat to resist twisting of girder bottom chords.
- Hip Hold Down (optional) combine CT1200 with ExtraHeavy HiLoad Girder Bracket for fixing hip on incoming girder truss connection.